A Deep Conversation: Deep Water Boat Lift Kits

In recent years, in Michigan at least, there has been a trend of lower water levels due to excessive temperatures and reduced precipitation. The resultant lowering in regional lake levels has required some adjustment for boat lift owners.  Very often the boat lift must be moved to deeper water to achieve enough depth for craft to clear the bottom framework.  Others, especially pontoon owners, have had to abandon their lifts and opt for either tie-off posts or freestanding canopy units with [...]

By |2018-11-26T20:22:59+00:00November 6th, 2013|Boat Lifts, Environment, Installs & Removals|Comments Off on A Deep Conversation: Deep Water Boat Lift Kits
Read More

Freestanding Canopy Kits

LakeShore Having a canopy frame and cover on your lift can be a very nice feature. This keeps your watercraft dry and makes the overall boating experience that much better. Yet, if you are in a situation where you either do not have a lift, cannot have a lift, or you cannot attach a canopy to your lift, as with cantilever style pontoon lifts, you may think that you are out of luck. However, you do have options and we are [...]

By |2018-11-26T20:22:34+00:00September 10th, 2013|Canopies and Covers, Installs & Removals|Comments Off on Freestanding Canopy Kits
Read More

Replacing Your Shore Station Lift Cables

So you’ve noticed some fraying in your lift cables or even worse one has broken and you are now faced with an urgent need to replace or change out your lift cables; what are your options? Basically, there are two ways in which the task before you can be met.  The two approaches come down to time and money.  You can purchase a winch tube rebuild kit and replace the innards of the winch tube of your lift or you can [...]

By |2018-11-28T14:55:27+00:00February 8th, 2013|Boat Lift Motors, Boat Lifts, Installs & Removals, Lift Repair, Maintenance, New Products, News, Solar|Comments Off on Replacing Your Shore Station Lift Cables
Read More

Galvanized or Stainless – Boat Lift Cables

The cables on your boat lift are perhaps the most important part of the whole unit, they tie the cradle assembly to the winch, allowing your watercraft to be raised and will be made of either stainless or galvanized steel. Both of these types of steel offer the benefit of corrosion resistance and strength, yet there are some differences that should be considered when you are making this decision. When choosing a new boat lift cable or, if you are replacing [...]

By |2018-11-28T14:56:45+00:00February 6th, 2013|Boat Lift Motors, Boat Lifts, Installs & Removals, Lift Repair, Maintenance, New Products, News|Comments Off on Galvanized or Stainless – Boat Lift Cables
Read More

Boat Lift Installation and Removal Helpers

There are now a good number of options on the market to assist with the installation and removal of a freestanding boat lift. By far, the most familiar and popular are wheel kits, so we have provided some information below about kits that we have used.  All of these kits have proven effective in getting boat lifts into and out of the water regardless of the state of the lake bottom. Smarte Jack™ Retractable Wheel Kit The Smarte Jack™ boat lift [...]

By |2018-11-28T14:58:24+00:00February 4th, 2013|Boat Lifts, Environment, Installs & Removals, Maintenance, New Products, News|Comments Off on Boat Lift Installation and Removal Helpers
Read More

Choosing A Free Standing Boat Lift

When it comes to choosing the right free standing boat lift for your boating needs you may find the decision a difficult one.  However, in reality there are only a few details that you will need to consider to guarantee that you get the right lift for the job.  Although few, these details are very important; these are: The Type of Craft The Dry Weight of the craft to be lifted The Length and Beam Width of the craft The Hull [...]

By |2018-11-28T15:01:26+00:00February 4th, 2013|Boat Lifts, Environment, Installs & Removals, Maintenance, New Products, Solar|Comments Off on Choosing A Free Standing Boat Lift
Read More

Choose the correct Boat Lift for your Boat

When it comes to choosing a freestanding lift or hoist for your boat, pontoon or PWC , there are a few things you will need to know to ensure you purchase a lift that works best with your watercraft. Knowing the overall weight and beam of your boat is the best place to start. This will allow you to choose the correct weight capacity and the correct inside width. Finding the Overall Weight When determining the overall weight of a watercraft, [...]

By |2018-12-13T17:26:10+00:00October 7th, 2010|Boat Lifts, New Products, News|Comments Off on Choose the correct Boat Lift for your Boat
Read More
Go to Top