How to Program a Shore Commander Boat Lift Motor

If you have a Commander Boat Lift Motor with a touch pad and would like to change the PIN code, here is what you do.

If the unit’s code has never been changed from the factory;

1. First enter the code “1”, “2”, “3”, “4”
2. Press and hold the code key down and at the same time, press the “2” button and release them at the same time
3. Once the red LED starts blinking, enter your own custom 4 digit code
4. The LED will automatically go out and your system has accepted the new code

If you would like to change your custom code;

1. First enter your code to unlock the unit
2. Press and hold the code key down and at the same time, press the “2” button and release them at the same time
3. Once the red LED starts blinking, enter your own custom 4 digit code
4. The LED will stop flashing once the 4th digit is entered and your new code will be active

To program or re-program your Key Fob remotes, here is what you do.

1. On the touch pad, press and hold the Code key down and press the “1” key and release them at the same time
2. The red LED on the touch pad will activate for 5 seconds
3. Press the Up button on the Key Fob
4. The red LED light will go out once the signal is received

Hope this helps…have a great day!

_{© 2013 BoatLiftandDock.com}